Filter
Top Products
64 C2908M-B (4/05)
The following are arrayed under “Presets”:
• Ten numbered preset buttons
• Pres (preset) button
• Clear button
• A SET check box
The following are arrayed under “Pattern”:
• A Start pattern button
• A Stop pattern button
“In Control” or “No Control” indicates whether you have control of the camera. Recording control buttons are beneath the picture (live video page
only).
On the Spectra live video control page, you can control the following:
• Presets—To program a preset: set the image using the arrow keys, click—SET, enter a preset number, and then click Pres. To activate a
preset: enter a preset number and click the Pres button. Performing any PTZ stops a scan preset.
• Patterns—You can program and run only one pattern through PelcoNet. To program a pattern: click SET, click Start, run your pattern using
the arrow keys, and then click Stop. To operate a pattern: click Start to begin the pattern and Stop to halt.
• Programming Menus—To access the programming menus: enter 95, click Pres. Use the open iris icon to open menus and arrow keys to
navigate and set options. Use the open iris icon in conjunction with the Exit option to move backward through menu layers and to exit pro-
gramming mode.
NOTE: You can program presets and patterns for Spectra III either from inside the camera menu or through a controller. With Spectra II you
can program presets and patterns through a controller or through the browser.