Filter
Top Products
24 Pelco Manual C1995M-A (10/01)
GENERAL MENU INFORMATION
MENU NAVIGATION AND EDITING
• When you enter a menu, the cursor is on EXIT. Pressing the arrow buttons moves the
cursor one position. Holding them down moves the cursor continuously through
selections until you release them.
• Pressing the +/- button changes the current selection.
• Double-pressing the +/- button changes the direction of the values—from increasing
value to decreasing value.
• Changing the camera number calls up the camera menu for that particular camera.
The cursor moves to EXIT.
• Holding the +/- button scrolls slowly through the choices for the entry.
ENTERING THE MENU SYSTEM
You can enter menus from Live or Playback mode. Press and hold, for more than three
seconds, any of the following buttons on the multiplexer’s front panel during normal operation:
• QUAD button — to enter the Main Selection menu (from here you can enter the other
menus, except for the Custom VCR Setup menu)
• LIVE/VCR button — to enter the Record Setup menu
• CAM 1-4 buttons — to enter the respective Camera Setup menu
• SEQ button — to enter the Sequence Setup menu
• VIEW button — to enter the System Setup menu