Filter
Top Products
Pelco Manual C1995M-A (10/01) 31
RECORD SETUP (LIVE/VCR BUTTON)
Figure 22. Record Setup Menu
To program the VCR recording parameters:
1. Select RECORD SETUP on the Main Selection menu or press the LIVE/VCR button
for about three seconds until the Record Setup menu appears. Type the password, if
requested. The currently selected menu item blinks.
2. Use the arrow buttons to move between items on the screen.
3. When the menu item you desire is highlighted (blinking), press the +/- button to cycle
through the options to select the one you want.
Record Speeds
Sets the VCR’s normal and alarm recording speeds. Setting speeds in the Record
Setup menu also sets speeds in the System Setup and Custom VCR Setup menus.
VCR Type
Select from among the available VCRs. If your VCR is not listed among the options,
do one of the following:
• Select UNIVERSAL. In the recording speed menu item at the top of the screen,
select an option your VCR will support.
• Select CUSTOM. Then go to CONFIGURE CUSTOM VCR and press the +/-
button to access the Custom VCR Setup menu. The switch interval can be
changed only while in this setting.
VCR Video Format
Composite is standard video on a coaxial cable. SVHS is higher resolution video on a
special cable.
RECORD SET-UP
NORMAL REC. SPEED
ALARM REC. SPEED
VCR TYPE
VCR VIDEO FORMAT
VCR SWITCH PULSE
2 / 6 / 8Hr
2 / 6 / 8Hr
ALARM HANDLING
MAIN MENU EXIT
ALARM DURATION
30 SECONDS
1 MINUTE
2 MINUTES
5 MINUTES
10 MINUTES
15 MINUTES
COMPOSITE
SVHS
CUSTOM
UNIVERSAL
*2, 6, or 8Hr 120 Hr
12 Hr 168 Hr
16 Hr 180 Hr
18 Hr 240 Hr
24 Hr 360 Hr
48 Hr 480 Hr
72 Hr 600 Hr
84 Hr 720 Hr
96 Hr 960 Hr
VCR SET-UP
UNIVERSAL
COMPOSITE
DISABLED
ENABLED +
ENABLED -
DISABLED
RECORD ALARMS
ALARM RECORD TIME
PLAYBACK FORMAT
AS A PRIORITY
ALARM DURATION
PELCO
AS A PRIORITY
ONLY
PELCO
ROBOT
DM
* 2/6/8 HR FOR NTSC MODEL MULTIPLEXERS, 3 HR FOR PAL MODELS.
REMAINING RECORD SPEEDS DEPEND ON VCR MODEL.
CONFIGURE CUSTOM VCR
(MAKES)
00133