Filter
Top Products
English 23
Getting started
Pin assignments
Follow the instructions below when connecting to a computer. Refer to page 22 for
a list of cables and adapters.
a. Signal connector: D-Sub HD 15-pin (PC/AT compatible model)
Connect the signal cable to the D-Sub HD 15-pin connector on the LCD
project unit.
b. Signal connector: D-Sub 15-pin (MAC) to convert a MAC D-Sub 15-pin
connector to a D-Sub HD 15-pin connector, connect a VGA-MAC adapter
(included) to the D-Sub 15-pin connector and then to the D-Sub HD 15-pin
connector on the LCD projector. Be sure to set the DIP switches on the VGA-
MAC adapter to your display type. (See “Setting the DIP Switches” on page 24)
Note: When using a Composite Sync Output type Macintosh, please use a
Composite Sync type VGA MAC adapter (pin 3 and pin 13 are connected).
1
2
3
4
5
6
8
15
1
9
5
15
1
11
10
6
Macintosh VGA
1 Earth for red video signal
2 Red video signal
3 Composite sync
4 ID1
5 Green video signal
6 Earth for green video signal
7 ID2
8 Unused
9 Blue video signal
10 ID3
11 Earth
12 Vertical synchronising signal
13 Earth for blue video signal
14 Earth
15 Horizontal synchronising signal
Pin
No.
Signal
1 Earth for red video signal
2 Green video signal
3 Blue video signal
4 Unused
5 Unused (Through out)
6 Earth for red video signal
7 Earth for green video signal
8 Earth for blue video signal
9 Unused
10 Earth
11 Unused
12 Unused
13 Horizontal synchronising signal
14 Vertical synchronising signal
15 Unused
Pin
No.
Signal