Filter
Top Products
36 Polaview 215E LCD Projector User’s Guide
Getting started
Turning off the input
signal display
The function which displays the currently selected input signal on the screen can be
turned off by the following procedure. The procedure and on-screen displays
shown below assume that an RGB signal is being used as the input signal.
1. Press MENU to display the menu.
2. Press ។ or ៓ to select SET UP PROJECTOR, and then press ្ or ៑ to
display the screen.
3. Press ។ or ៓ to select INPUT DISP, and then press ្ or ៑ to select ON
or OFF.
Select OFF to turn off the input signal display function.
Select ON to turn on the input signal display function. The input signal will be
displayed each time it is changed. (This is the factory setting.)
4. Press MENU twice to exit.
Disabling the POWER
button on the remote
control unit
In order to prevent the power from being turned off by mistake, the POWER
button on the remote control unit can be disabled by the following procedure. The
procedure and on-screen displays shown below assume that an RGB signal is being
used as the input signal.
1. Press MENU to display the menu.
2. Press ។ or ៓ to select SET UP PROJECTOR, and then press ្ or ៑ to
display the screen.
3. Press ។ or ៓ to select REMOTE POWER, and then press ្ or ៑ to
select ON or OFF.
Select OFF to disable the POWER button on the remote control unit.
Select ON to use the POWER button on the remote control unit normally.
(This is the factory setting.)
4. Press MENU twice to exit.
RGB ADJUST
RGB SYNC MENU
>SET UP PROJECTOR
LANGUAGE
/SPRACHE /LANGUE
/IDIOMA /LINGUA
SELECT : PUSH ។or៓
SET : PUSH ្or៑
END : PUSH MENU
FRONT/REAR FRONT
>INPUT DISP ON
REMOTE POWER ON
EXPANSION (VGA) ON
LAMP TIME RESET NO
SELECT : PUSH ។or៓
SET : PUSH ្or៑
END : PUSH MENU
MENU
SET UP PROJECTOR
RGB ADJUST
RGB SYNC MENU
>SET UP PROJECTOR
LANGUAGE
/SPRACHE /LANGUE
/IDIOMA /LINGUA
SELECT : PUSH ។or៓
SET : PUSH ្or៑
END : PUSH MENU
FRONT/REAR FRONT
INPUT DISP ON
>REMOTE POWER ON
EXPANSION (VGA) ON
LAMP TIME RESET NO
SELECT : PUSH ។or៓
SET : PUSH ្or៑
END : PUSH MENU
MENU
SET UP PROJECTOR