Filter
Top Products
English 35
Getting started
Using other useful functions
You may use buttons on the LCD projector or remote control unit for the
following operations.
Selecting the
Language for On-
Screen Displays
(for Model PV215E-C
only)
The LCD projector can display screens in one of five different languages. The
procedure and on-screen displays shown below assume that an RGB signal is being
used as the input signal.
1. Press MENU to display the menu.
2. Press ។ or ៓ to select LANGUAGE, and then press ្ or ៑ to display the
screen.
3. Press ។ or ៓ to select the language.
4. Press MENU twice to exit.
Selecting the Video
System Format
The LCD projector is equipped with full NTSC, PAL, SECAM, PAL-M, PAL-N
and NTSC4.43 video support. Usually set to AUTO, the broadcast format is
automatically switched according to the tape inserted. If you experience poor color,
however, you may have to set to NTSC, PAL, SECAM, PAL-M, PAL-N, or
NTSC4.43 as described below.
S-VIDEO/VIDEO input is selected (page 34).
1. Press MENU to display the menu.
2. Press ។ or ៓ VIDEO SYSTEM, and then press ្ or ៑ to display the
screen.
3. Press ។ or ៓ to select the desired video system.
4. Press MENU twice to exit.
MENU
LANGUAGE
RGB ADJUST
RGB SYNC MENU
SET UP PROJECTOR
>LANGUAGE
/SPRACHE /LANGUE
/IDIOMA /LINGUA
SELECT : PUSH ។or៓
SET : PUSH ្or៑
END : PUSH MENU
>ENGLISHINPUT DISP ON
DEUTSCH
FRANCAIS
ESPANOL
ITALIANO
SELECT : PUSH ។or៓
END : PUSH MENU
MENU
VIDEO SYSTEM
VIDEO ADJUST
SET UP PROJECTOR
>VIDEO SYSTEM
LANGUAGE
/SPRACHE /LANGUE
/IDIOMA /LINGUA
SELECT : PUSH ។or៓
SET : PUSH ្or៑
END : PUSH MENU
>AUTO
PAL
SECAM
NTSC
PAL-M
PAL-N
NTSC4.43
SELECT : PUSH ។or៓
END : PUSH MENU