Filter
Top Products
English
7
General information
Important safeguards
Caution:
Please read all of these instructions before you operate your LCD
projector. Keep these instructions in a safe place for future reference.
Machine Noise Information Ordinance 3. GSGV, January 18, 1991: The sound
pressure level at the operator position is equal or less than 44dB (A) according to
ISO7779. (However, this is when the ambient temperature is less than 30°C.)
Electrical energy can perform many useful functions. This LCD projector has been
engineered and manufactured to meet applicable safety standards. But improper use
can result in potential electrical shock or fire hazards. In order not to defeat the
safeguards incorporated into this LCD projector, observe the following basic rules
for its installation, use, and servicing.
1.
Unplug the LCD projector from the power point before cleaning.
2.
Do not use liquid cleaners or aerosol cleaners. Use a soft dry cloth to clean the
LCD projector unit. If the unit is very dirty, wet a cloth with neutral detergent,
squeeze it tight, wipe the unit with it, and finish by wiping with a dry cloth. Do
not use a chemical duster or polisher-cleaner because it can adversely affect the
unit and peel the paint coat.
3.
Do not use attachments not recommended by Polaroid, as they may cause
hazards.
4.
Do not use the LCD projector near water; for example, near a bathtub,
washbowl, kitchen sink, laundry tub, in a wet basement or near a swimming
pool. Never spill liquid into the LCD projector.
5.
Do not place the LCD projector on an unstable cart, stand, or table. The LCD
projector may fall, which may cause serious injury to a child or an adult and/or
serious damage to the unit. Use only with a cart or stand recommended by its
manufacturer as being suitable for use with an LCD projector.
6.
Ceiling, wall, or shelf mounting for installation should use a mounting kit
approved by the manufacturer for use with an LCD projector and should
follow the manufacturer’s instructions.
7.
LCD projector equipment and cart combinations should be moved with care.
Quick stops, excessive force, and uneven surfaces may cause the equipment and
cart combination to overturn.
8.
Slots and openings in the cabinet back and bottom are provided for ventilation.
To ensure reliable operation of the LCD projector and to protect it from
overheating, these openings must not be blocked or covered. These openings
should never be covered with cloth or other materials. The bottom opening
should not be blocked by placing the LCD projector on a bed, sofa, rug, or
other similar surface. The LCD projector should not be placed near or over a
radiator or heating vent. The LCD projector should not be placed in a built-in
installation such as a bookcase unless proper ventilation is provided.
9.
The LCD projector should be operated only from the type of power source
indicated on the back of the LCD projector or in the specifications. If you are
not sure of the type of power supplied to your home, consult your LCD
projector dealer or local power company.
!