Filter
Top Products
English 37
Getting started
Canceling the
enlarging (scanning
line conversion)
function
When a VIDEO/S-VIDEO signal in NTSC format or a signal with less than
800 x 600 dots (for example, 640x480 dots) is input, the LCD projector
automatically enlarges the image to 800 x 600 dots. This may cause picture quality
degradation. For a better image, select EXPANSION (VGA) or (NTSC):OFF by
the following procedure.
The procedure and on-screen displays shown below assume that an RGB signal is
being used as the input signal.
1. Press MENU to display the menu.
2. Press ។ or ៓ to select SET UP PROJECTOR, and then press ្ or ៑ to
display the screen.
3. Press ។ or ៓ to select EXPANSION (VGA) OR (NTSC), and then press
្ or ៑ to select ON or OFF.
Select OFF to cancel the enlarging (scanning line conversion) function.
Select ON to use the enlarging (scanning line conversion) function. (This is the
factory setting.)
4. Press MENU twice to exit.
Changing to 16:9
(wide) screen format
When a VIDEO or S-VIDEO signal in NTSC format is input, the image can be
displayed in 16:9 (wide) screen format by the following procedure.
S-VIDEO/VIDEO input is selected (page 34).
1. Press MENU to display the menu.
2. Press ។ or ៓ to select SET UP PROJECTOR, and then press ្ or ៑ to
display the screen.
3. Press ។ or ៓ to select 16:9 (NTSC), and then press ្ or ៑ to select ON
or OFF.
Select OFF to return the normal screen. (This is the factory setting.)
Select ON to display in 16:9 (wide) screen format.
4. Press MENU twice to exit.
Note: Even if the 16:9 (wide) screen feature is set to OFF, when an “S1” signal is
input, the image is automatically displayed in 16:9 (wide) screen mode.
RGB ADJUST
RGB SYNC MENU
>SET UP PROJECTOR
LANGUAGE
/SPRACHE /LANGUE
/IDIOMA /LINGUA
SELECT : PUSH ។or៓
SET : PUSH ្or៑
END : PUSH MENU
FRONT/REAR FRONT
INPUT DISP ON
REMOTE POWER ON
>EXPANSION (VGA) ON
LAMP TIME RESET NO
SELECT : PUSH ។or៓
SET : PUSH ្or៑
END : PUSH MENU
MENU
SET UP PROJECTOR
RGB ADJUST
RGB SYNC MENU
>SET UP PROJECTOR
LANGUAGE
/SPRACHE /LANGUE
/IDIOMA /LINGUA
SELECT : PUSH ។or៓
SET : PUSH ្or៑
END : PUSH MENU
FRONT/REAR FRONT
INPUT DISP ON
REMOTE POWER ON
>16:9 (NTSC) OFF
EXPANSION (NTSC) NO
LAMP TIME RESET NO
SELECT : PUSH ។or៓
SET : PUSH ្or៑
END : PUSH MENU
MENU
SET UP PROJECTOR