Filter
Top Products
24 Polaview 215E LCD Projector User’s Guide
Getting started
Setting the DIP
Switches
Find the resolution of your display type on the table shown at left (also on the
adapter). Then, set each DIP switch that is indicated by a “ ” mark to ON.
Example: If your display type is 16'', set DIP switches 2 and 4 on the VGA-MAC
adapter to ON. By doing so, the signal will travel through switches 2 and 4 and pin
numbers 4 to 10 as shown in the signal chart above.
RESOLUTION DIP SWITCHES
123456
*21" MULTIMODE
•• •
*17" MULTIMODE •• ••
*13" MULTIMODE •• ••
VGA/SVGA MODE
••
21" 1152X870
••••
19" 1024X768
••
16" 832X624
••
13" 640X480
••
LEGEND:
*
= SUPPORTS APPLE MULTIPLE SCAN
SOFTWARE
•
= ON
123456
ON DIP
123456
ON DIP