Filter
Top Products
English 31
Getting started
Turning off the power
1. Press the POWER button on the LCD projector or remote control to
turn off the power.
The STANDBY(R) ON(G) indicator flashes red while the LCD projector
cools down, and then changes to solid red when the fan stops after about a
minute.
2. Set the MAIN power switch on the LCD projector to OFF.
Positioning the LCD projector and screen
The screen should be positioned so that it is not directly touched by sunlight or
room light, as this will wash out the colors of the picture, making it hard to see.
When possible, close all blinds and curtains and dim the lights. Also, the projector
should be at a 90° angle to the screen for the best results. To determine the distance
for the desired size, please refer to the LCD projector/relative screen position chart
on page 32.
Top view
Side view
Your LCD projector is equipped with an image reverse feature. So, in addition to
front projection, you can also reverse the image for rear projection. (See page 19)
S
T
A
N
D
A
R
D
VOLUME MODE
MENU
INPUT
STATUS
CODE
a
S-VIDEO
VIDEO IN L-AUDIO IN-R RS232C RGB IN AUDIO IN AUDIO OUTRGB OIUT
c
d
e
b