Filter
Top Products
English 41
Getting started
RGB sync adjustment
For V POSI, H POSI, H SIZE and PHASE adjustments, see the PC Output
Timing Relative Value Chart on page 43. These adjustments are carried out
automatically when the Auto Setup feature of the ProMouse software is used. See
“ProMouse Control Feature” on page 54.
RGB input is selected (See page 33). Use the buttons on the LCD projector or
remote control unit.
1. Press MENU to display the menu.
2. Press ។ or ៓ to select RGB SYNC MENU, and then press ្ or ៑ to
display the screen.
3. Press ។ or ៓ to select, and then press ្ or ៑ to display the item to be
adjusted.
POWER
MODE
FREEZE SHUTTER
MENU INPUT
LIGHT POINTER
MUTE VOLUME
STANDARD
S
T
A
N
D
A
R
D
VOLUME MODE
MENU
INPUT
STATUS
CODE
a
d
b
c
a MENU button
b Adjust ។/៓/្/៑buttons
c MENU Button (remote control)
d Adjust ។/៓/្/៑buttons
(remote control)
RGB ADJUST
>RGB SYNC MENU
SET UP PROJECTOR
LANGUAGE
/SPRACHE /LANGUE
/IDIOMA /LINGUA
SELECT : PUSH ។or៓
SET : PUSH ្or៑
END : PUSH MENU
MENU
RGB SYNC MENU
VGA60 H=31, 5KHz
V=60 Hz
>V POST 0 -----
I-----
H POST 0 -----I-----
H SIZE 0 -----I-----
PHASE 0 -----I-----
SELECT : PUSH ។or៓
SET : PUSH ្or៑
END : PUSH MENU
RGB SYNC MENU
VGA60 H=31, 5KHz
V=60 Hz
-+
>V POST +5 -----
I-----