Polaroid 215EPolaview Projection Television User Manual


 
46 Polaview 215E LCD Projector User’s Guide
Getting started
Projecting PC-Card (ATA Flash Card) data
Using this software, “JPEG Viewer”, you can save the image displayed on the PC
screen as a JPEG file to a PC-Card (ATA Flash Card). If you insert the PC-Card in
this LCD projector, you can project using the JPEG Image Playback feature.
Follow the instructions below to use this feature.
Caution: It is possible that this feature will not operate correctly with all PC Cards.
Operating performance of the following PC Card makers is verified. (ATA Flash
Card). Panasonic; Hitachi; TDK; SanDisk
After purchasing a PC Card, perform (Normal) format with Windows 95 before
using it.
Follow the instructions below when projecting image data saved on the PC-Card.
(See “JPEG Viewer features” on page 48)
1. Turn on the LCD projector to start projecting. (See “Turning on the
power” on page 30 )
2. Insert the PC-Card (2a)
into the PC-Card slot (2b)
on the LCD projector.
Then, press INPUT on the
LCD projector or remote
control and select “PC-
CARD”.
The INDEX and first image
in each FOLDER are shown.
Note:
It takes a few seconds for the list of images to be displayed. (WAIT...appears) If
you made JPEG files with something other than JPEG Viewer, it may take a
much longer time to display the list of images.
See “When using BMP or JPEG JPEG Converter feature”, and convert to
JPEG files ideally suited to this LCD projector.
If you made a FOLDER with something other than JPEG Viewer, FOLDER-
A, FOLDER-B,...will be displayed.
“ROOT” is displayed if images corresponding to this LCD projector are found
in root directly.
The screen turns blue if images corresponding to this LCD projector are not
found in the PC-Card.
When you want to eject the PC-Card, slide the PC-Card RELEASE button in
the direction of the arrow mark on the LCD projector, and “NO CARD screen
is displayed.
3. Press or to select FOLDER.
Press select the next FOLDER.
Press to select the previous FOLDER.
The selected FOLDER is indicated by a red arrow.
The selected image in FOLDER is encircled by a
bold, blue frame.
Note: Press VOLUME to play back the first image
of the selected FOLDER.
S
T
A
N
D
A
R
D
VOLUM
E
MODE
MENU
INPUT
STATUS
CODE
S-VIDEO
VIDEO IN
L-AUDIO-R
RS232C
RGB IN
AUDIO IN
RGB OUT
AUDIO OUT
MAIN
MAIN
OFF
ON
2b
2a
INDEX
FOLDER 1 7
FOLDER 2 12
FOLDER 3 24
FOLDER 4 5
FOLDER 5 13
FOLDER 6 11
SELECT FOLDER : or
TO SLIDE SHOW : VOLUME-
TO MULTI : VOLUME+