Filter
Top Products
English 45
Getting started
4. Press ។ or ៓ to select R LEVEL, G LEVEL OR B LEVEL for the
COLOR (for RGB input) or SUB COLOR (for S-VIDEO/VIDEO input).
5. Press ្ or ៑ to display the R, G or B LEVEL ADJUST screen.
6. Press ្ or ៑ to adjust the R, G or B Level.
The setting will be displayed by numerals and a bar.
Example of adjustment: R LEVEL
Press ៑ to strengthen the red component.
Press ្ to weaken the red component.
7. Press MENU once to return to the RGB ADJUST or VIDEO ADJUST
menu, or three times to exit.
Selecting the picture
memory
Press MODE on the LCD projector or remote control unit to select the desired
picture mode.
• When MODE is pressed, the preset setting will first be displayed on the screen
for about 5 seconds.
• Each time you press MODE, the display will change as shown below:
RGB ADJUST MODE
-+
BRIGHTNESS 0 -----
I-----
PICTURE 0 -----
I-----
COLOR
>R LEVEL 0 -----I-----
G LEVEL 0 -----
I-----
B LEVEL 0 -----
I-----
VIDEO ADJUST MODE
(1/2)
>COLOR 0 -----
I-----
TINT 0 -----
I-----
BRIGHTNESS 0 -----
I-----
PICTURE 0 -----
I-----
SHARPNESS 0 -----
I-----
VIDEO ADJUST MODE
(2/2)
SUBCOLOR
>R LEVEL 0 -----
I-----
G LEVEL 0 -----I-----
B LEVEL 0 -----I-----
VIDEO ADJUST MODE
-+
R LEVEL +5 -----
I-----
RGB ADJUST MODE
-+
>R LEVEL +5 -----
I-----
MODE1 MODE2 MODE3