Filter
Top Products
English 39
Getting started
Adjusting the projected image
This LCD projector’s picture is set to standard specifications at the factory.
However, you can adjust the image to suit your own preferences by using the RGB
or VIDEO ADJUST feature. Three memory modes allow you to adjust and save up
to three sets of settings for each input signal (RGB and S-VIDEO/VIDEO).
For RGB signal input, three items can be adjusted: “BRIGHTNESS,”
“PICTURE,” and “COLOR (White Balance)”.
For VIDEO signal input, six items can be adjusted; “COLOR”, “TINT”,
“BRIGHTNESS”, “PICTURE”, “SHARPNESS”, and “SUB COLOR” (white
balance).
Note: When a PC-Card is inserted, the RGB “BRIGHTNESS” memory is used.
Only “BRIGHTNESS” can be adjusted.
Input image
adjustment
RGB or S-VIDEO/VIDEO input is selected (page 33). Use the buttons on the
LCD projector or remote control.
1. Press MENU to display the menu.
2. Press ។ or ៓ to select RGB ADJUST or VIDEO ADJUST, and then press
្ or ៑ to display the screen.
Three different sets of control adjustments can be memorized for different
projection situations.
POWER
MODE
FREEZE SHUTTER
MENU INPUT
LIGHT POINTER
MUTE VOLUME
STANDARD
S
T
A
N
D
A
R
D
VOLUME MODE
MENU
INPUT
STATUS
CODE
a
b
f
c
e
d
a MODE button
b MENU button
c Adjust ។/៓/្/៑buttons
d MODE button (remote control)
e Adjust ។/៓/្/៑buttons
(remote control)
f MENU button (remote control)
>RGB ADJUST
RGB SYNC MENU
SET UP PROJECTOR
LANGUAGE
/SPRACHE /LANGUE
/IDIOMA /LINGUA
SELECT : PUSH ។or៓
SET : PUSH ្or៑
END : PUSH MENU
MENU
>VIDEO ADJUST
SET UP PROJECTOR
VIDEO SYSTEM
LANGUAGE
/SPRACHE /LANGUE
/IDIOMA /LINGUA
SELECT : PUSH ។or៓
SET : PUSH ្or៑
END : PUSH MENU
MENU
RGB S-VIDEO/VIDEO