Filter
Top Products
Connections & Setup
TV
DVD
PLAYER
S-VIDEO
VIDEO IN
AUDIO OUT
R L
AUDIO IN
R L
CABLE
OR
OFF-AIR
SIGNAL
ANT IN
DVD Player + TV with Audio/Video Input Jacks
1. Connect the audio cables to the AUDIO OUT FRONT L (left - white) and R (right - red) jacks
on the back of your DVD Player, and to the corresponding Audio Input jacks on your TV.
2. Connect the video cable.
• Basle video connection - Connect the video cable (yellow) to the VIDEO OUT jack on
the back of your DVD Player, and to the Video Input jack on your TV.
OR
• S-Video - (optional) If your TV has an S-Video Input jack, connect the S-Video cable to the
S-VIDEO OUT jack on the back of your DVD Player and to the S-Video jack on your TV. If
your TV doesn't have S-Video, use the basic video connection listed above.
OR
• Component video (optional) - If your TV has component video (Y, Pn, and PR jacks) use
video-grade cables for the Y, PB, and PRconnections. Note that it is essential to match the
color-coded connectors with a compatible TV. If your TV doesn't have component video,
use the basic video connection listed above.
3. Plug in the AC power cord into an AC outlet.
Note: Your cable or off-air connection to the television should not be affected by this
connection. Connect your cable or off-air antenna to your television as you normally
would. You may need to consult your television manual for details.
Go to page 21
Chapter 1 9