Filter
Top Products
Connections & Setup
The Jacks on the Back of the DVD Player
When connecting, make sure you connect Output jacks to Input jacks, Video to Video, Right Audio to Right Audio, etc.
f
f _ f
AUDIO OUT DIGITAL AUDIO
z-channel Output: OUT
VIDEO OUT Insert audio cables (left Use a digital optical
and right) from the
cable (not provided)
(Composite Video Ou_ut) FRONT R and L jacks on
Connect a video your DVD player to the to connect your
cable to this jack corresponding Audio DVD Player to a
and to the Video Input jacks (left and compatible Dolby
Input jack on righ0 on your TV or Digital or DTS
your TV. receiver, receiver or decoder.
.°J,L
,o ,_ ,o Io'
J
Y, PB' PR (Component V_ulto Output)
Use these jacks to connect to
a TV with Component video
input jacks. Unlike a single
video input, component video
maintains the video signal as
three separate signals through
these three jacks. This
connection provides optimum
quality. To ensure maximum
picture quality, use three
video-grade cables for the Y,
PB, and Pa connections. Note
that it is essential to match the
color-coded connectors with a
compatible TV.
S-VIDEO
If your TV has an
S-Video jack, you
can connect an S-
Video cable for
increased video
quality. The S-
Video cable only
carries the picture
signal; remember
to connect the left
and right audio
cables.
5.1 AUDIO OUT
5.1..Channd Output:
Insert audio cables from
the FRONT R and L,
SURROUND R and L,
SUB (subwoofer), and/
or CENTER jacks on
your DVD player to the
corresponding Audio
Input jacks on your A/V
receiver.
20 Chapter 1