Filter
Top Products
Playing DVDs
To Load and Play a Disc
Turn on the TV and your DVD Player (press ON-OFF on tile player or press the DVD buuon on
the remote control).
This is an example
of a one-sided
disc.
This is an example
of a 2-sided disc.
The title is in the
center.
1.
2
Press tile OPEN-CLOSE bulton on the l:ront of the DVI) Hayer or
on the remote. The disc tray opens.
Place a disc gently into the tray with the disc's label facing up
(double-sided discs have content on both sides, so you can place
either side up).
3. Press the OPEN.CLOSE o] PI.AY button. The disc uay closes.
The DVD Player reads the disc's table of contents, and then one of
three things happens depending on how the disc was programmed:
• The disc starts playing.
• The disc menu appears on the screen. One of the options will
start disc play. Highlight that option and press OK on the DVD
remote.
• The DVD Player's main menu appears on the screen. Highlight
the Play option and press OK on the DVD remote.
When you stop playing a disc, the DVD player remembers where you
stopped. When you start playing the disc again, the player picks up
where you left off unless the disc is removed, the player is unplugged, or
you pressed the STOP button twice.
Using a Disc Menu
A disc is capable of having an on-screen menu that is separate from the DVD player's menu
system and on-screen Info Display. The disc menu might only contain a list of the titles and
chapters, or it may allow you to change features such as language and playback settings.
Although the content and operation of disc menus vary from disc to disc, the following example
will give you an idea of what to expect.
1. While the disc is playing, press the MENU
button on the remote or the front of the
player. The disc menu appears.
Tip
Many discs skip the disc
menu and start playing
automatically. To access
the disc menu when
you're playing a disc,
press MENU on the
remote.
An example of a disc menu. The
menus on discs vary because the disc
menu iscreated by the disc's author.
Chapter 2 29