Filter
Top Products
Connections 8t Setup
DVD Player + TV + VCR + Satellite Receiver
1. Connect the audio cables to the AUDIO OUT FRONT L (left - white) and R (right - red) jacks
on the back of your DVD Player, and to the corresponding Audio Input jacks on your TV.
2. Connect the video cable.
• Basic video connection - Connect the video cable (yellow) to the VIDEO OUT jack on
the back of your DVI) Player, and to the Video Input jack on your TV.
OR
• S-Video - (optional) If your TV has an S-Video Input jack, connect the S-Video cable to the
S-VIDEO OUT jack on the back of your DVD Player and to the S-Video jack on your TV. If
your TV doesn't have S-Video, use the basic video connection listed above.
OR
• Component video (optional) - If your TV has component video (Y, Pm and PR jacks) use
video-grade cables for the Y, Pv and PR connections. Note that it is essential to match the
color coded connectors with a compatible 'IV. If your TV doesn't have component video,
use the basic video connection listed above.
3. Use a coaxial cable to connect the antenna output on the satellite receiver to the antenna input
on the VCR.
4. Plug in the AC power cord into an AC outlet.
Go to page 21
Chapter 1 19