Filter
Top Products
Connections & Setup
TV
DVD
PLAYER
AUDIO OUT
R I_
AUDIO IN
S-VIDEO VIDEO PN R L ANT IN
I- ®
L.p --
CABLE OR
OFF-AIR
SIGNAL
DOLBY DIGITAL or
DTS RECEIVER
Dolby Digital ®and DTSe
Both Dolby Digital and DTS are audio formats used to record 5.1-channel audio signals onto the digital track of film (while
the film is being made). Both of these formats provide up to six separate channels: left, right, center, left rear, right rear,
and common subwoofer.
The disc will play 5.1-channel sound only if you've connected a DTS or Dolby Digital receiver or decoder and if the
original movie the disc was recorded from was encoded in the Dolby Digital or DTS format.
Please Read This Before Using the DIGITAL AUDIO OUT Jack!
Thisplayer's digital ouq)utjack is designed for a connection to a Dolby Digital or DT5 receiver or decode_ This
player has two types of DIGITAL AUDIO OUT jacks: optical and coaxial. Use the jack (and the corresponding cable)
that matches the type of DIGITAL AUDIO IN jack your receiver or decoder has.
Older digital equipment may not be compatible with the Dolby Digital bitstream. Such a connection can create a
high level of noise that may be harmful to your ears, and could damage headphones or speakers.
It is important to choose the correct Digital Output setting in the DVD Player's Sound menu, especially when you use
the DIGITAL AUDIO OUTjack. For more information, see chapter 6,
12 Chapter 1