Filter
Top Products
Connections & Setup
DVD Player + TV + 5.1-channel Audio/Video
Receiver
To Connect the DVD Player
1.
Connect the audio cables from the AUDIO OUT FRONT R and L, SURROUND R and L,
SUBWOOFER, and/or CENTER jacks on your DVD player to the corresponding Audio Input
jacks on your audio/video receiver. Set up the speakers using the Speaker option from the
Sound menu (see chapter 5).
2. Connect the video cable,
• Basic video connection - Connect the video cable (yellow) to the VIDEO OUT jack on
the back of your DVD Player, and to the Video Input jack on your TV.
OR
• S-Video - (optional) If your TV has an S-Video Input jack, connect the S-Video cable to the
S-VIDEO OUT jack oo the back of your DVD Player and to the S-Video jack on your TV. If
your TV doesn't have S-Video, use the basic video connection listed above.
OR
• Component video (optional) - If your TV has component video (Y, PB, and PR jacks) use
video-grade cables for the Y, Pu, and PR connections. Note that it is essential to match the
color coded connectors with a compatible TV. If your TV doesn't have component video,
use the basic video connection listed above.
.
Down Mix Audio (optional) - Connect the second set of AUDIO OUT jacks on the back of
the DVD player to the AUDIO IN jacks on the back of the "IV. This allows you to listen to
discs without going through the receiver. For example, if it's late at night and you want to
listen to a disc without 5.1-channel sound on, you can turn off the receiver and listen to the
disc through the "IV speakers.
4. Plug in the AC power cord into an AC outlet.
Go to page 21
Chapter I 17