Filter
Top Products
13
Getting Started
This player conforms to the NTSC color system.
When you play a disc recorded in the PAL color
system, the player outputs the video signal or the setup
display, etc. in the PAL color system and the picture
may not be appear on the TV screen that conforms to
the NTSC color system only.
In this case, open the disc tray and remove the disc.
Setups for the player
Some setup adjustments are necessary for the player
depending on the TV or other components to be
connected.
Use the setup display to change the various settings.
For details on using the setup display, see page 52.
• To connect the player to a wide-screen TV
In the setup display, set “TV TYPE” in “SCREEN
SETUP” to “16:9” (default setting). For details, see page
56.
• To connect the player to a normal TV
In the setup display, set “TV TYPE” in “SCREEN
SETUP” to “4:3 LETTER BOX” or “4:3 PAN SCAN.”
For details, see page 56.
• To connect the player to a TV or VCR via a SCART
(EURO AV) connector that conforms to the S video
signals or RGB signals
In the setup display, set “LINE” in “CUSTOM SETUP”
to “S VIDEO” or “RGB.” For details, see page 58.
• To connect the player to a monitor or projector with
component video input connectors that conform to
the output signals from the COMPONENT VIDEO
OUT (Y, P
B/CB, PR/CR) connectors on the player
In the setup display, set “COMPONENT OUT” in
“CUSTOM SETUP” to “INTERLACE.” For details, see
page 58.
• To connect the player to a TV that accepts
progressive (525p) format signals
Connect the player to your TV using the COMPONENT
VIDEO OUT connectors, and set “COMPONENT OUT”
in “CUSTOM SETUP” to “PROGRESSIVE.”