Filter
Top Products
21
Playing Discs
Notes on playing DTS sound tracks on a DVD
The signals of the DTS sound tracks ar e output fr om the
DIGITAL OUT OPTICAL and COAXIAL connectors only. No
sound will be output fr om the AUDIO OUT connectors.
• If the player is connected to an audio component lacking a
built-in DTS decoder , do not set “DTS” in “DIGITAL OUT” to
“ON” in the setup display . Other wise, when you play the DTS
sound track, a loud noise will come out fr om the speakers,
affecting your ears or causing the speakers to be damaged.
• When you set “DTS” in “AUDIO SETUP” to “OFF”, no sound
will come out fr om the DIGITAL OUT OPTICAL and
COAXIAL connectors even if you play DTS sound tracks on
DVDs.
Notes
• If you leave the player or the r emote in pause or stop mode for
15 minutes, the scr een saver image appears automatically . It
will also appear if you play back a CD for mor e than 15
minutes. To make the scr een saver image go away , press H.
(If you want to set the scr een saver function to of f, see page 57.)
• If you do not operate the player or the r emote for mor e than
30 minutes when a disc is not being played, the player
automatically enters the standby mode. (Auto Power Of f
function)
• While playing a disc, do not tur n off the player by pr essing
POWER. Doing so may cancel the settings of the menu. When
you tur n of f the player , press x first to stop playback and then
press @/1 on the r emote. After the power indicator lights up in
red and the player enters standby mode, pr ess POWER on the
player.
After following Step 4
xWhen playing a DVD
A DVD menu or title menu may appear on the TV
screen (see page 26).
xWhen playing a VIDEO CD
Depending on the VIDEO CD, a menu may appear on
the TV screen. Y ou can play the disc interactively by
following the instr uctions on the menu. (PBC Playback,
see page 27.)
To turn on the player
Press POWER on the player . The player enters standby
mode and the power indicator lights up in r ed.
Then press @/1 on the r emote. The player tur ns on and
the power indicator lights up in gr een. In standby mode,
the player also tur ns on by pr essing A on the player or by
pressing H.
To turn off the player
Press @/1 on the r emote. The player enters standby
mode and the power indicator lights up in r ed.
To disconnect the power of the player , press POWER on
the player .
Notes on playing DTS sound tracks on a CD
• Do not play DTS sound tracks without first connecting the
player to an audio component having a built-in DTS decoder .
The player outputs the DTS signal via the DIGIT AL OUT
OPTICAL and COAXIAL connectors even if “DTS” in “AUDIO
SETUP” is set to “OFF” in the setup display , and may af fect
your ears or cause your speakers to be damaged.
• Set the sound to “STEREO” when you play DTS sound tracks
on a CD. (See “Changing the Sound” on page 37.) If you set
the sound to “1/L” or “2/R”, no sound will come fr om the
DIGITAL OUT OPTICAL and COAXIAL connectors.
• If you play a CD with a DTS sound track, a loud noise may
come out fr om the AUDIO OUT connectors, af fecting your ears
or causing the speakers to be damaged.