Filter
Top Products
70
Additional Information
Troubleshooting
Even though you set the aspect ratio in “TV
TYPE” in “SCREEN SETUP” of the setup display,
the picture does not fill the screen.
, The aspect ratio is fixed on your DVD.
Sound
There is no sound.
, Check that the player is connected secur ely.
, The audio connecting cor d is damaged. Replace it
with a new one.
, Make sure you connect the player to the audio
input connectors on the r eceiver (amplifier). (page
14)
, Make sur e you tur n on the TV and the r eceiver
(amplifier).
, Make sur e you select the appr opriate input on the
receiver (amplifier) so that you can listen to the
sound fr om the player .
, The player is in pause mode or in Slow-motion
Play mode. Pr ess H to r etur n to nor mal play
mode.
, The player is in fast for ward or fast r everse mode.
Press H to r eturn to nor mal play mode.
, Check the speaker connections and setting (page
17, 63). Refer to the operating manual of your
receiver (amplifier).
, If you use the DIGITAL OUT connectors, set
“DIGITAL OUT” to ”ON” in the setup display .
Other wise no sound will come fr om the DIGITAL
OUT connectors. (page 63)
, SACD audio signals ar e not output fr om the
DIGITAL OUT OPTICAL or COAXIAL connectors.
Sound is noisy.
, Clean the disc.
, When you play a CD with DTS sound tracks, noise
will come fr om any connector other than the
DIGITAL OUT OPTICAL or COAXIAL connector.
(page 21)
Sound distortion occurs.
, In the setup display , set “AUDIO ATT” in ”AUDIO
SETUP” to “ON.” (page 63)
The sound loses its stereo effect when you play a
VIDEO CD or a CD.
, Set “AUDIO” to “STEREO” in the Contr ol Menu
display. (page 37)
, Make sur e you connect the player cor rectly. (pages
10, 14, 16)
Operation
The remote does not function.
, Remove any obstacles between the r emote and the
player.
, Use the r emote near the player .
, Point the r emote at the r emote sensor
on the
player.
, Replace all of the batteries in the r emote with new
ones if they ar e weak.
The disc does not play.
, There is no disc inside (“Inser t disc.” appears on
the TV screen).
Insert a disc.
, Insert the disc cor rectly with the playback side
facing down on the disc tray .
, Clean the disc.
, The player cannot play CD-ROMs, etc. (page 7)
Insert a DVD, a VIDEO CD, or CD.
, Check the r egion code of the DVD. (page 5)
, Moisture has condensed inside the player . Remove
the disc and leave the player turned on for about
half an hour . (page 8)
The player does not play from the beginning
when playing a disc.
, Program Play, Shuffle Play, Repeat Play or A-B
Repeat Play has been selected. Pr ess CLEAR.
(pages 47 thr ough 51)
, Resume Play has been selected.
Press x on the fr ont panel or on the r emote befor e
you start playing. (page 25)
, A title menu or a DVD menu automatically
appears on the TV scr een when you play your
DVD, or a setup display automatically appears on
the TV screen when you play your VIDEO CD
with PBC functions.
The player starts playing the disc automatically.
, The DVD featur es the auto playback function.
, “AUTO PLAY” in “CUSTOM SETUP” is set to
“TIMER.” (page 58)
Playback stops automatically.
, The disc may contain an auto pause signal. While
playing such a disc, the player stops playback at
the signal.