Filter
Top Products
67
Settings and Adjustments
Number
buttons
TV/DVD
switch
1
4
7
2
5
8
0
3
6
9
By adjusting the r emote signal, you can contr ol your TV
or AV receiver (amplifier) with the supplied r emote.
Controlling TVs with the remote
1 Slide the TV/DVD switch to TV.
2 Hold down ?/ 1, and enter your TV’s manufacturer’s
code (see the table) using the number buttons.
Then release ?/ 1.
Code numbers of controllable TVs
If more than one code number is listed, tr y entering them
one at a time until you find the one that works with your
TV.
Manufacturer Code number
Sony (default) 01
Grundig 11
Hitachi 24
Loewe 45
Nokia 15, 16, 69
Panasonic 17, 49
Philips 06, 07, 08
Saba 12, 13
Samsung 22, 23
Sanyo 25
Sharp 29
Telefunken 36
Thomson 43
Toshiba 38
?/1 (on/standby)
button
Number
buttons
TV/DVD
switch
Controlling Your TV or AV Receiver (Amplifier)
with the Supplied Remote
Notes
• If you enter a new code number, the code number previously
entered will be erased.
• When you replace the batteries of the remote, the code number
may be reset to the default setting. Reset the appropriate code
number.
Controlling the TV
You can contr ol your TV using the buttons below . When
you set the TV/DVD switch to TV, you can also contr ol
the number , -/--, ?/1 and ENTER buttons.
By pressing
?/1
TV/VIDEO
TV/DVD*
VOL
PROG
WIDE MODE
Number buttons,
-/-- and ENTER
* If you connect the player to the TV via the SCART (EURO AV)
connectors, the input source for the TV is set to the player
automatically when you start playback or press any button
except for ?/1. In this case, press TV/DVD to return the input
to the TV.
Notes
• Depending on the TV, you may not be able to control your TV
or to use some of the buttons above.
• If you use number buttons to select the TV’s program position,
press -/-- followed by the number buttons for two-digit
numbers.
You can
Turn the TV on or off
Switch the TV’s input source between
the TV and other input sources
Switch the TV’s input source between
the TV and SACD/DVD player
Adjust the volume of the TV
Select the program position of the TV
Switch to or from the wide mode of a
wide TV.
Select the program position of the TV
TV/DVD
-/--
TV/VIDEO
VOL
PROG
ENTER
ENTER
WIDE MODE
?/1 (on/standby)
button
1
4
7
2
5
8
0
3
6
9