Filter
Top Products
16
This section provides information on the controls and
connections available on your Digital Music Server.
DISC TRAY
Insert a disc with the label side up.
OPEN/CLOSE button
Pressing the open/close button opens the disc tray. Place
a compact disc on the tray with the label side facing up.
Press the button again to close the tray.
OUTPUT button
Press the output button to display what music is playing
on the currently selected output. Pressing the output
button for a second time will select the next output in
sequence.
ACTION buttons
Action buttons allow you to perform specific operations
dependent on the current menu screen. For more
information on using the action buttons see the chapter
called Using the Digital Music Server action keys p.22.
DISPLAY
The display shows information about the music available
on the unit, the status of the Digital Music Server (for
instance if the unit is currently playing), and the current
configuration of the unit.
SELECT button
Selects the option currently visible on the display.
NAVIGATION buttons
The navigation buttons allow you to move up, down, left
or right through the menus shown on the display.
R / E button
When the button is pressed briefly during playback, play
restarts at the beginning of the current track. A second
brief press moves to the beginning of the previous track.
When the button is held for a longer period of time the
music will rewind at high speed.
RECORD button
The record button is an action key - on some menu
screens you can use this button to begin a recording,
from the CD inside the unit. When managing playlists
this button is used to create new playlists or add tracks to
an existing playlist.
D / Q button
When the button is pressed briefly during playback, play
restarts at the beginning of the next track. When the
button is held for a longer period of time the music will
fast forward at high speed.
C PAUSE button
Press the pause button to interrupt playback temporarily.
A PLAY button
Press the play button to resume playback if the music has
been stopped or paused.
B STOP button
Press the stop button to halt playback on the current
output.
STANDBY
Press the standby button to put your Digital Music Server
into either standby or off mode, press again to switch
your Digital Music Server back on.
REMOTE SENSOR
This window receives signals transmitted from the
remote control unit.
ONLINE
The online indicator is illuminated when the modem is
active.
CONTROLS AND CONNECTIONS
FRONT VIEW