Filter
Top Products
39
CD Recording
Allows you to configure options for recording from a CD:
The Recording Speed setting allows you to reduce the
speed at which audio is extracted from the CD during the
recording process. When the Reject Damaged Tracks
option is set to off the maximum recording speed will be
increased, however damaged compact discs may produce
errors in the recording. Any changes to these settings
will take effect the next time a CD is recorded.
Language
Allows you to select the language for the TV user
interface - languages available are English, French,
German, Italian, and Spanish.
System Information
Shows the serial number, production date, and software
version number of your Digital Music Server. You may
need to quote these if you contact Xantech for technical
support.
System Settings
Provides a series of menus to allow you to change the
hardware configuration on your Digital Music Server:
The following table summarises the settings available on
each of the System Settings menus:
Option Description
Modem Settings
Allows you to specify the following
settings when connecting to the
internet via the built-in modem:
number of connection retries, whether
to use tone or pulse dialling, and the
modem initialisation string.
Ethernet Settings
Allows you to specify how your Digital
Music Server obtains an IP address when
connected to an Ethernet network. The
Mode option allows you to select
whether the IP address is set Manually,
by a DHCP Server on the network, or by
a BOOTP Server. If the Manual option is
selected, use the Manual Ethernet
Settings option to specify an IP Address,
IP Mask and Gateway. If DHCP or
BOOTP is selected the IP address, IP Mask
and Gateway will be set automatically.
Once the Mode option has been set
correctly the assigned IP address, IP
Mask, Gateway, DNS 1, and DNS 2 will
be displayed as well as the MAC address
of the unit.
Server Access
Allows you to configure options for
accessing the Digital Music Server music
collection from a home computer via the
Ethernet connection. For more
information see the chapter called Using
your Digital Music Server with a Portable
Player p.43.
Proxy Server Settings
Allows you to specify the IP Address and
Port Number for internet access via a
proxy server if required.
Controller Settings
Specifies the communication speed for the
Controller port on the rear of the unit.
Video settings
Specifies whether the unit is configured
for PAL or NTSC use.
Remote Diagnostics
Select this option if instructed to set up
your modem to receive incoming calls
from technical support staff.
Upgrade Unit
Select this option when supplied with a XiVA software
upgrade disk for your Digital Music Server.