Xantech XMusic Home Theater Server User Manual


 
22
REGISTERING YOUR
DIGITAL MUSIC SERVER
Before using your Digital Music Server you should spend
some time registering your purchase. This enables you to
receive technical support as well as software upgrades.
To register your Digital Music Server
When the welcome screen is first displayed, press
the
key on the remote control or the
Regstr action key on the front panel.
The following registration screen will be displayed:
The same information is also shown on the front panel
display.
• Press the
key on your remote control or
the Cont. action key on the front panel to display
the first registration screen:
Using the Digital Music Server action keys
The front panel of your Digital Music Server has four
“action” keys located underneath the main display. The
function of these keys changes depending on which
menu you are currently viewing. The available actions
are shown on the bottom line of the front panel display.
In the example above, the functions Menu, Open, Info,
and Play are available; next to each option is a symbol
indicating where a key on the Digital Music Server
remote control may be used instead of pressing the
action key. By default:
3 corresponds to an information action
2 corresponds to a cancel action
5 corresponds to a select action
The TV screen also displays these actions as well as other
actions available on the Digital Music Server remote control.
Digital Music Server status icons
The TV display shows the current status of the Digital
Music Server using a series of icons as shown below:
1. Indicates that your Digital Music Server is
receiving information from a remote control.
2. Indicates the status of the currently selected
output (e.g. play, stop, pause etc.)
3. Indicates that an audio CD is inside the CD tray.
4. When the handset is lifted the unit is connected
to the internet using the built-in modem; when
the handset is on top of the telephone the unit
is offline. If your Digital Music Server is set to
connect to the internet via a broadband
ethernet connection this symbol is not used.