Filter
Top Products
23
To connect your Digital Music Server to the
Internet
The next sequence of screens helps you connect your
Digital Music Server to the Internet.
• Press the Cont. action key on the front panel or
the
key on the remote to begin.
The following screen then allows you to select from a
range of options to set up your internet connection:
• Press the 8 or 9 keys to select between the
following options:
1. Use Ethernet.
Use this option to connect to a high speed,
broadband internet service via the Ethernet port.
Note: You will require additional networking
hardware for this type of connection. Contact
your dealer for further information.
Note: AOL and Compuserve accounts are not
currently supported.
2. Use Modem - the built-in account.
Your Digital Music Server will connect using a pre-
installed internet account for your country.
Note: The built-in Internet account may not be
available for your country.
3. Use Modem - your own account.
If you are already using a computer to connect to
the Internet via a telephone line, and you have
an existing Internet account, you may prefer to
use these account details for your Digital Music
Server. If you do not know your username,
password, and Internet account telephone
number you may be able to read these from your
computer’s settings; otherwise contact your
Internet Service Provider for assistance.
4. Do not connect.
You should use this option if you do not presently
have access to a telephone line (you may set up a
connection later).
• Press the 5 action key on the front panel or the
key on the remote to select the option
you have chosen.
If you have selected Use Ethernet follow the on-
screen instructions to specify how your Digital
Music Server obtains an Ethernet IP address. If
you select the Manual option a series of screens
will allow you to enter an IP address, IP mask,
Gateway, IP DNS1 and IP DNS2.
To use the alphanumeric keypad
As part of the registration process you will need to enter
your name and address into the Digital Music Server. You
can do this using the following keys on the remote control:
Alternatively you can use the built-in alphanumeric grid
to enter details:
• Press the 8 key to move the cursor onto the grid,
then use the 6, 7, 8, and 9 keys to highlight
characters, and the
key to select them.
• Use the 9 key repeatedly to move the cursor
back into the text entry box to return to normal
text entry mode.
When you have completed each entry:
• Press the OK action key on the front panel or the
3 button on the remote.
When you have entered your name and address details
you will be prompted to select your country:
• Press the 9 or 8 keys to highlight your country
and press the
key on the remote or the 5
action key on the front panel.
Action How
Enter Text
Use the alphanumeric keys on the
remote control. For example, to type
an S press the 7 key four times.
Switch between
entering upper-case
or lower-case letters
Press the action key labelled Caps or
the HCAPS key on the remote
control.
Enter a space. Press the 0 key.
Delete a mistake
Press the IDELETE key on the remote
control.
Move the cursor
within the text
Press the 6 or 7 keys.