Filter
Top Products
21
SWITCHING ON AND OFF
There are two power saving modes available from the
Standby button on the Digital Music Server front panel
and the L button on the remote control.
If you are not using your Digital Music Server it is
strongly recommended that you place the unit into one
of the two power saving modes.
Standby mode
Standby mode should be used when the Digital Music
Server is not being used for a short period of time.
Putting the unit into standby takes just a few seconds;
switching the unit on from standby also takes just a few
seconds. Do not remove the power from the Digital
Music Server in this mode.
Off mode
Off mode should be used when the Digital Music Server
is not being used overnight (or for several days). There is
a short wait whilst the unit is switched to off mode;
switching the unit on from off mode may take a few
minutes. When the unit is in off mode it consumes very
little power. You can safely remove the power from the
Digital Music Server in this mode.
To enter standby or off mode
• Press the Standby key on the front panel or the
LStandby key on the remote control.
The following prompt is displayed:
The front panel display shows:
Either:
• Press the Stby action key on the front panel or
the
key on the remote control to switch
to standby.
TV SCREEN AND FRONT PANEL DISPLAY
The following diagram shows the key features of a
typical XMusic Digital Music Server TV screen and front
panel display:
1. Indicates the title of the current screen.
2. Title of the current selection, shown highlighted
on the TV screen.
3. Indicates that you can use the 9 or 8 keys to
browse up and down the current menu list.
4. Indicates that you can press the 7 key to look
inside the currently selected item, such as to show
the tracks in an album, or the albums by an artist
or in a genre.
5. Action keys available from the current menu for
selection or navigation.
After a short delay the TV screen shows:
Or:
• Press the Off action key on the front panel or the
3 key on the remote control to switch to off
mode.
After a short period of time the TV display and front
panel display will switch off.
To switch on from standby or off mode
• Press the Standby key on the front panel or the
L Standby key on the remote control.