Dish Network Solo 811 Satellite TV System User Manual


 
Appendix
Page 116
Staying Legal
Title 47, Section 605(e)4, United States Code (U.S.C.) makes it a federal
crime to modify this receiver to enable it to receive encrypted (scrambled)
television programming without payment of required subscriptions.
Conviction can result in a fine of up to $500,000 and imprisonment for five
years, or both. Any owner of this receiver who procures or willfully causes
its modification is an accessory to that offense and may be punishable in the
same manner. Investigative authority for violations lies with the Federal
Bureau of Investigation (FBI).
This product may incorporate copyright protection technology that is
protected by U.S. patents and other intellectual property rights. Use of such
copyright protection technology must be authorized by Macrovision, and is
intended for home and other limited pay-per-view uses only unless
otherwise authorized by Macrovision. Reverse engineering or disassembly
is prohibited.
U.S. Patent No’s 4631603, 4577216, 4819098 are licensed for limited pay
per view only.
FCC Compliance
The following text is extracted from Federal Communications
Commission (FCC) regulations, as of the publication date of
this Guide. Contact the FCC (see following) or your library for
the complete text of the regulations.
Telephone Communication
This equipment complies with Part 68 of the FCC rules and the
requirements adopted by the ACTA. On the back panel of this equipment is
a label that contains, among other information, a product identifier in the
format US:AAAEQ##TXXXX. If requested, this number must be provided
to the telephone company.
The REN is used to determine the number of devices that may be connected
to a telephone line. Excessive RENs on a telephone line may result in the
devices not ringing in response to an incoming call. In most but not all areas,
the sum of RENs should not exceed five (5.0). To be certain of the number
of devices that may be connected to a line, as determined by the total RENs,
contact the local telephone company. For products approved after July 23,
2001, the REN for this product is part of the product identifier that has the
format US:AAAEQ##TXXXX. The digits represented by ## are the REN
without a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the
REN is separately shown on the label.
This equipment uses the following Universal Service Order Code (USOC)
jacks: RJ-11C.
A plug and jack used to connect this equipment to the premises wiring and
telephone network must comply with the applicable FCC Part 68 rules and
requirements adopted by the ACTA. A compliant telephone cord and
modular plug is provided with this product. It is designed to be connected to
a compatible modular jack that is also compliant. See installation
instructions for details.
Connection to party line service is subject to state tariffs. Contact the state
public utility commission, public service commission or corporation
commission for information.
If your home has specially wired alarm equipment connected to the
telephone line, ensure the installation of this equipment does not disable
your alarm equipment. If you have questions about what will disable alarm
equipment, consult your telephone company or a qualified installer.
If this equipment causes harm to the telephone network, the telephone