Filter
Top Products
Page 28
Chapter 2
Receiver Description and Installation
2. Use the
Scan Analog selection to add the local channels to the Program
Guide
automatically or select the Add Analog option on the Local
Channel Setup
menu. This opens the Add Local Analog Channel menu.
3. Enter the channel number in the
Ch. Num field.
Note: Be sure to enter two digits. For single digit numbers, place a zero in
front of it.
4. To assign the channel to one of the major broadcast networks, select an
Affiliation option. Or, select the None option if you do not want to assign
the channel to a broadcast network.
5. To edit the name of the channel, select the
Save option. This opens the Edit
Local Channel Name
menu:
6. Highlight a letter and press the SELECT/OK button.
7. Do this again to spell out the channel name. You can enter up to five
characters. If you need to, use the
SPACE option to insert a space or the
<BACK option to correct a letter. When you are done entering the channel
name, select the
Save option. The receiver displays the Local Channel
Setup
menu again.
8. Repeat the above steps 3 through 7 if you want to add another local analog
channel.
9. To delete one or more channel(s), select the channel(s) in the
Channels list
and then select the
Remove option.