Filter
Top Products
Page 61
Advanced Features
Page 61
Advanced Features
Setting Up Digital Audio
You must have a capable amplifier/decoder to use Dolby
®
Digital sound.
The receiver has a built in Dolby Digital adapter and also supports Linear
PCMA (regular mono or stereo sound).
• Press MENU 6-8 for the Dolby Digital Setup menu.
• Select the mode to support your home theater system digital audio
input.
• Select the
Save option.
The TV audio will continue to run normally even if the program broadcast
does not use Dolby Digital sound. You may want to lower the volume on
the TV for best results when changing between programs.
Note: Be sure to select only a mode supported by your amplifier.
Note: Digital audio formats are controlled by the programmer. Not all
modes are supported on all programs.
Note: Some satellite HD programs feature Dolby Digital audio even
though the
Program Guide does not show the (DD) symbol for such
programs.
Closed Captioning
The receiver supports several closed captioning formats. Captioning is
carried to the TV by the DISH DVI and YP
BPR outputs for each format
and displayed as long as captioning is turned on.
The RCA video and S-V
IDEO outputs carry standard closed captioning, but
they require a closed captioning compatible TV to decode and display the
information on the screen. Standard definition display of closed captioning
is a function of the TV and not the receiver.
Note: Closed captioning information is provided by the programmer and is
only displayed if it is a part of the signal provided to DISH Network.