Filter
Top Products
COPYING A TAPE 11
Use the Copy Tape
TM
feature to copy an 8mm tape onto a VHS
tape:
1. Make sure the VHS tape is long enough to record the
entire 8mm tape. You can increase the recording time on
the VHS tape by changing the RECORD SPEED in the
VHS MENU (LP is twice as long as SP; SLP is three times
as long as SP.)
2. Insert your 8mm tape into the 8mm deck on the left side
of the 8mm/VHS Dual-Deck VCR, and the VHS tape into
the VHS deck on the right side.
3. Press
COPY TAPE
on the center front panel of the 8mm/VHS
Dual-Deck VCR or on the remote control.
That’s it! The 8mm/VHS Dual-Deck VCR will make a perfect
VHS copy of your 8mm tape.
If you wish to stop the copying procedure, press
COPY TAPE
again.
Summary of Recording Speeds
Tip:
Make sure the Record
Safety Tab on the VHS
tape is intact. If it’s
missing, and you’re sure
you want to record onto
that tape, you can put a
piece of adhesive tape
over the hole.
Copying
a Tape
SP LP SLP (EP)
VHS
T-60 1 hr 2 hrs 3 hrs
T-120 2 hrs 4 hrs 6 hrs
T-160 2 hrs 40 min 5 hrs 20 min 8 hrs
T-180 3 hrs 6 hrs 9 hrs
T-200 3 hrs 20 min 6 hrs 40 min 10 hrs
8mm
E6/P6-30 30 min 1 hr
E6/P6-60 1 hr 2 hrs
P6-90 1 hr 30 min 3 hrs
E6/P6-120 2 hrs 4 hrs
P6-150 2 hrs 30 min 5 hrs