Filter
Top Products
92 GO VIDEO REFERENCE GUIDE
▲▲▲▲▲▲▲▲
Audio Insert
1. Connect the source of your new audio (a tape player, for
example) to the Line 1 (front panel) or Line 2 (rear panel)
audio input jacks on the 8mm/VHS Dual-Deck VCR. See
the Audio Connections section of the Reference Guide for
hookup instructions.
2. Press
MENU
until the AMERICHROME COPY MENU
appears on the screen.
3. Move to the AUDIO INSERT item. Press
SELECT
to choose
either Line 1 or Line 2. Press
QUIT
to exit the menu
system.
4. Insert your 8mm tape and a blank VHS tape. Prepare
your external audio source (start the tape, for example).
Press
COPY TAPE
.
➤ The audio recorded on the VHS tape during Copy
Tape will come from the Audio Input jacks, and the
video will come from the 8mm deck.
Audio Dub
1. Connect the source of your new audio (a tape player, for
example) to the Line 1 (front panel) audio input jacks on
the 8mm/VHS Dual-Deck VCR. See the Audio Connec-
tions section of the Reference Guide for hookup instruc-
tions.
2. Insert the VHS tape.
3. Press
PLAY
.
4. Press
PAUSE
at the point where you want to replace the
audio.
5. Press
DUB
on the VCR Front Panel (VHS side).
➤
DUB
will blink on the Front Panel Display. The On
Screen Display will say DUB PAUSE.
6. Prepare your external audio source (start the tape, for
example).
Tip:
You may want to turn on your
On Screen Display to monitor
the Insert and Dub events. You
may also want to turn AUTO
PLAY/REW off to keep control of
the deck functions. The display
will not be recorded onto your
tape.