GoVideo GV8050 VCR User Manual


 
6 HOOKING UP YOUR DUAL-DECK VCR
You can hook up your 8mm/VHS Dual-Deck VCR in exactly
the same way as you hook up any other VCR. If you already
own a VCR, take a few minutes to note how this VCR is
hooked up. Then, simply swap the 8mm/VHS Dual-Deck
VCR with your old VCR, using the same settings and
connections. Here are some things you should take note of in
your current hookup:
1. Which cable attaches to the VCR’s IN jack on the back of
the VCR.
2. Which cable attaches to the OUT jack on the back of the
VCR.
3. Which channel your TV is tuned to.
4. Which channel, 3 or 4, is set on the back of your VCR.
5. If you have a cable converter box leading into your VCR,
you will need to note which channel (2, 3, or 4) your VCR
is tuned to.
Basic Hookup
1. Place your 8mm/VHS Dual-Deck VCR next to your TV
and plug the VCR power cord into a wall outlet. Discon-
nect all antenna and cable connections.
Your exact hookup will
depend on whether or not
you subscribe to cable TV,
and whether you have a
cable converter box or
other equipment (such as
a laser disc player,
satellite receiver, etc).
See the Reference Guide
for additional hookups.
Basic Antenna Hookup:
Connecting Your
Dual-Deck VCR to Your TV or Monitor
Note:
IN FROM ANTENNA:
OUT TO TV:
VIDEO
LR
AUDIO
IN (LINE 2)
OUT
3 4
CH
DUAL-DECK VCR BACK PANEL
Twin-lead
Coaxial
ANTENNA CABLES
or
Adapter
(supplied)
VHF/UHF
TV BACK PANEL
Dual-Deck
VCR Cable
(supplied)
MULTIMEDIA
CONTROL
PORT