Filter
Top Products
Program the Pattern Generator Output
The Sequence window is used to program the pattern generator output. In
this exercise, you will change the base field to binary and program the first
"walking one."
1
Highlight the Pat Gen Format field, and press the Select key.
2 Highlight Pat Gen Sequence field in the pop-up menu, and press the
Select key.
3 Highlight the base field below the PATGEN field, and press the Select
key. Highlight Binary in the pop-up menu, and press the Select key.
4 Use the knob to scroll to the field under
***MAIN SEQUENCE START***.
5 Use the arrow keys to highlight the far-right field.
6 Press the Select key. Type 0001 and press the Done key.
Programming the Pattern Generator Output
Result The base field is in binary with the first "walking one" of 0001 programmed.
Using the Pattern Generator
Program the Pattern Generator Output
9-12