Filter
Top Products
Get the Waveform on the Display
The first step when using an oscilloscope is to get the waveform on the
display. Autoscale is an algorithm that automatically optimizes the display of
one or more waveforms. The oscilloscope triggers at an arbitrary point until
you set up the trigger conditions.
1
Press the Config key.
2 Highlight the field in the top, left corner of the display, and press the
Select key. Highlight Scope in the pop-up menu, and press the Select
key.
3 Highlight the Autoscale field and press the Select key. Highlight
Continue in the pop-up menu and press the Select key.
Running the Oscilloscope with Autoscale
Result The waveform is on the display with the trigger occurring on a rising edge.
The arbitrary trigger
point happens to be on a
rising edge.
The glitch you will
capture with the timing
analyzer and the
oscilloscope.
Triggering the Oscilloscope with the Timing Analyzer
Get the Waveform on the Display
8-6