Filter
Top Products
Logic Analysis made easy:
a self-paced training guide
This training kit will quickly teach you how to use the HP 1660 and
HP 1670 Series Logic Analyzers to get your work done. The exercises
in this book will teach you how to perform basic timing and state
analysis measurements and how to make more complex
measurements, such as comparing two state listings, setting up
complex state triggers, and making state and timing measurements
simultaneously. You will also learn oscilloscope measurements if you
are using a logic analyzer that has a built-in oscilloscope. You will see
how easy it is to use the HP 1660 and HP 1670 Series Logic Analyzers,
and at the same time, learn basic digital measurement concepts.
The exercises in this training guide are designed to work with any of
the HP 1660 or HP 1670 Series analyzers with some exceptions: the
exercise in chapter 5, "Mixed Mode - Correlation of State and Timing
Data," will not work with an HP 1663 or HP 1664. Also, you need an
analyzer with an internal oscilloscope for chapters 7 and 8. If your
analyzer has an oscilloscope, you will see a "CS" after the model
number. To do the exercises in chapter 9, you will need an analyzer
with an internal pattern generator. If your analzyer has a pattern
generator, you will see a "CP" after the model number.
Materials needed
You need the following materials to complete the exercises in this
training kit:
• One HP 1660 or HP 1670 Series Logic Analyzer
• This training kit (part number HP E2433-60012)
• Probe assembly (part number HP 01650-61608) or termination
adapter (part number HP 01650-63203)
• One HP 10461A TTL Data Pod
iv