Filter
Top Products
Change a Label Name and Modify Channel
Assignments
1 Press the Format MENU key twice.
2 Highlight Format MACHINE 2 in the pop-up menu, and press the Select
key.
3 Highlight the top field under Labels, then type TCOUNT using the
keypad. Press the
Done key when you are finished typing.
4 Highlight the field showing the 16 channels of Pod A3, to the far right
of the TCOUNT label. Press the
Select key.
4 If there are asterisks in the pop-up, press the Clear entry key.
5
Press the ⇑ (up-arrow) key to place asterisks in the lower eight
channel positions. Press the
Done key.
Result The top label is now the TCOUNT label with the lower eight channels of Pod
A3 assigned to it.
Turn on the TCOUNT Label in the Waveform Menu
The timing data will be displayed in the waveform menu with the state data
listed above. Turning the TCOUNT label on in the waveform menu tells the
analyzer to display the timing data for TCOUNT.
1
Press the Waveform MENU key to display Waveform Machine2.
2 If the large vertical field on the left side of the display has TCOUNT 0
through TCOUNT 7 displayed, go to "Clear the Timing Analyzer
Trigger" on the next page. Otherwise, continue to the next step.
3 Highlight the large vertical field on the left side of the display, and
press the
Select key twice.
4 Highlight Insert in the pop-up menu, and press the Select key.
5 Press the Select key to choose TCOUNT.
6 Choose Sequential from the next pop-up menu.
Result The waveform menu is now set to display the timing data for TCOUNT. The
sequential option inserted all channels of the label into the display.
Mixed Mode - Correlation of State and Timing Data
Change a Label Name and Modify Channel Assignments
5-6