Filter
Top Products
Ripple Counter Output and Stored States
The figure above shows you the output of the ripple counter (the circle) and
the sequence of qualification and storage that the state analyzer performed.
The asterisks indicate when the state analyzer found and stored valid terms
in this example. All states were initially excluded, using the "no state" term.
First the "a" term was stored. Next, states that were within the specified
Range1 term (50 - 58) were stored, while the analyzer searched for an
occurrence of term "e." Once the remaining terms and range were found in
the specified sequence, the state analyzer stored everything (anystate) until
its acquisition memory was filled.
With multi-level state triggering, you specify the data to be stored by the
state analyzer. If you are debugging software, you can store or exclude
certain program lines or entire blocks of code, such as subroutines.
Counter Output
Logic analyzer
storage sequence
Advanced State Triggering
Run the State Analyzer and View the Data
6-15