Add State Trigger Sequence Levels
You tell the analyzer what data to capture by setting the sequence
specification. In this exercise, your sequence specification will have five
sequence levels.
1
Highlight the 1 field in the State Sequence Levels box of the Trigger
menu. Press the
Select key.
2 Highlight the Insert Level field, and press the Select key. Highlight
Before in the pop-up menu, and press the Select key.
3 In the Trigger Macro Library, use the knob to highlight "1. User level -
custom combinations, loops,
" then press the Done key.
Custom triggering is set up by selecting the user level. In the Trigger Macro
library, trigger macros are also available for common trigger applications.
4
Repeat step 2 and 3 two more times. After inserting these two levels,
press the
Done key to close the Sequence Level 1 pop-up menu.
Adding State Trigger Sequence Levels
Result You now have Sequence Levels 1 through 5. You can scroll through the
sequence levels by highlighting "State Sequence Levels" centered above
sequence level 1 and turning the knob.
Selecting "Before"
inserts a new
sequence level
before the sequence
level 1.
Advanced State Triggering
Add State Trigger Sequence Levels
6-7