Filter
Top Products
31
Initial Settings
● Delay Time Settings
You can adjust the delay time for each speaker.
1 Press 5/∞ to select [DELAY], then press [ENTER].
The Delay Time Settings screen appears.
2 Press 5/∞ to select the type of speaker.
• F.SP (Front speakers) and S.WOOFER (Subwoofer) are at 0ms and
cannot be adjusted.
3 Press 2/3 to set the desired delay time.
• You can adjust C.SP (Center speaker): within a range of 0ms to –5ms.
• You can adjust R.SP (Rear speakers): within a range of 0ms to –15ms.
• You can use the test tone to check the effect of the settings. See page 31.
4 Press 5/∞ to select Delay, then press [ENTER].
The Delay Time Settings screen closes.
● Using the Test Tone
You can play a test tone when adjusting the speaker level or delay time.
1 While adjusting the speaker level or delay time, press 5/∞ to select Test Tone, then press [ENTER].
You can play a test tone from all speakers except the subwoofer.
• To play the test tone from a specific speaker, press 5/∞ to select the speaker.
2 Press 2/3 to adjust the Level or Delay setting.
3 Press 5/∞ to select Test Tone, then press [ENTER] to stop the test tone.
TEST TONE
0ms
0ms
0ms
0ms
F.SP
C.SP
R.SP
S WOOFER
PRESS KEY
SPK.SETTING
EXPERT
LEVEL
DELAY
PREFERENCE1
PREFERENCE2
LFE
BASS
BASS
XVD9000_p24-31.p65 2/27/01, 4:07 PM31