Konica Minolta VI-700 Universal Remote User Manual


 
149
Chapter
2
View
Menu
9i
910
900
700
300
View – Zoom [Z] (Effective while held down)
Enlarging/Reducing the Displayed Item
This command is used to enlarge (zoom-in) or reduce (zoom-out) the displayed item, or to move the camera to
change the view angle.
Ref.
For a description of camera position, refer to the View–CameraSettings command (page 155).
Note
View–Zoommodewillbeactivewhenthiscommandisselected.TocanceltheView–Zoommode,executetheView
–Zoomcommandagain.However,ifyouareexecutingthiscommandusingtheshortcutkey,theView–Zoommode
canbecanceledbyreleasingthekey.
Left : zoom-in, zoom-out
Middle ([Shift] + Left) : –
Right : Drags the camera.
Operating Procedure
1
Click [Zoom] on the [View] menu.
2
Drag the item in an element view win-
dow while holding down the left mouse
button.
Dragging the item upward will enlarge it
(zoom-in) and dragging it downward will re-
duce it (zoom-out).
To move the camera (i.e. drag the camera), drag
while holding down the right mouse button.
M
emo
The element will be displayed in simple form during
zoom and drag. It will be displayed in detailed form when
zooming or dragging is canceled.