Konica Minolta VI-700 Universal Remote User Manual


 
254
Chapter
2
Pop-up Menus
in Image Window
9i
910
900
700
300
Change Image
Changing the Color Image
This command is used to change the currently displayed color image with a new one.
Operating Procedure
1
From the pop-up menu, click [Change
Image].
A sub menu will appear.
2
Select the desired color image.
The currently displayed color image will be
replaced with the selected one.
Overlay
Displaying Wireframe on a Color Image
This command is used to overlay wireframe on the currently displayed color image.
Operating Procedure
1
From the pop-up menu, click [Overlay].
Wireframe will be overlaid on the element im-
age.
Note
However,ifthecurrentlydisplayedcolorimageisthe
onethathasbeenaddedtothedatatakenbytheVIVID
(VI)seriesdigitizer,nowireframewillbedisplayed.
Zoom In
Changing the Color Image
This command is used to enlarge the currently displayed color image.
Operating Procedure
1
From the pop-up menu, click [Zoom In].
The color image will be enlarged in steps by
the following magnication ratio each time this
command is selected.
1/12, 1/8, 1/6, 1/4, 1/3, 1/2, 2/3, 1, 2, 3, 4, 5, 6,
7 and 8
If the image is enlarged beyond the image win-
dow, a scroll bar will appear.