Konica Minolta VI-700 Universal Remote User Manual


 
234
Chapter
2
Tool
Menu
9i
910
900
700
300
Tool – Measure
Measuring Dimensions within the Selected Element(s)
This command measures specied dimensions within the selected element.
Parameters for [Tool-Measure] Dialog Box
Points
Measures the distance between multiple points on the element (the distance between two selected
points, or the dimensions of the “bounding box” tted to three or more selected points).
Point to Face
Measures the distance between a specied point and a selected face (where the face is specied by
selection of multiple points).
Angle
Measures the angle formed by three specied points.
Circle
Measures the circle formed by multiple points (the circle dened by three specied points, or the
circle formed by tting of multiple selected points.)
Operating Procedure
1
From the element list, select the de-
sired elements
2
Select the [Measure] from the [Tool]
menu.
The [Tool – Measure] dialog box will appear.
3
Select the type of measurement you
want to perform by checking on the
radio button.
M
emo
The measurement results is displayed in the upper-right win-
dow. Note that the content of this window can be edited.
The measurement procedure is indicated sequentially in
the Status window.
4
Click the [Exit] button.
Tool – Measure mode will be canceled.