Konica Minolta VI-700 Universal Remote User Manual


 
189
Chapter
2
Build
Menu
9i
910
900
700
300
Build – Move – Elements [M] (Effective while held down)
Moving Element(s)
This command is used to move the selected element(s).
Left : Moves the element(s) using the mouse.
Middle ([Shift] + Left) : Moves the element(s) along the major axis.
Right : Moves the element(s) by entering values.
Operating Procedure
1
From the element list, select the desired
element(s).
2
From the [Build] menu, select [Move]
and then click [Elements].
The selected element will be ready to be dis-
played in all windows. It will be displayed if it
is not displayed in the active window or the
windows for which all the elements are set to
be displayed.
3
Drag with the left mouse button.
The element(s) will move accordingly.
Dragging with the middle (or [Shift] + Left) but-
ton will move the element(s) along the major axis.
M
emo
The element will be displayed in simple form during
drag. It will be displayed in detailed form when dragging
is canceled.
4
Press the [ESC] key.
Build – Move – Elements mode will be can-
celed.