Konica Minolta VI-700 Universal Remote User Manual


 
260
Chapter
3
Error
Messages
Error Message (Alphabetically) Cause Action
File write permission error.
An attempt was made to save a le in 
a directory for which no le write 
permission was given.
Click the [OK] button to close the mes-
sage dialog box.
An attempt was made to copy a le in a
directory for which no le write permis-
sion was given when “Copy” or “Copy/
All” was selected.
File write permission error: user
preferences.
No write permission was given for the
preference le or directory.
Click the [OK] button to close the mes-
sage dialog box.
*No preference le will be created even
if the [OK] button is clicked.
(The settings will be lost if this software
is exited.)
FillHoles Disable.
Failed to ll holes. (Failed to divide
holes.)
Click the [OK] button to close the mes-
sage dialog box.
FillHoles Fault! Please select other
Algorithm.
Failed to ll holes. (This message ap-
pears when replacement fails even if
“Replace meshes” is selected.)
Click the [OK] button to close the mes-
sage dialog box.
Identical name entered. Please
enter another name.
The [Rename] button was clicked even
though the same le name as the origi-
nal le name had been entered.
Click the [OK] button to close the mes-
sage dialog box.
Illegal format le.
An attempt was made to open a le
which cannot be read.
Click the [OK] button to close the mes-
sage dialog box.
Invalid directory.
An attempt was made to enter a direc-
tory name which did not exist.
Click the [OK] button to close the mes-
sage dialog box.
Invalid format.
(VIVID 700, VI-700)
The memory card was not formatted. Click the [OK] button to close the mes-
sage dialog box.
Memory allocation error.
Failed to reserve sufcient memory to
execute a command.
Click the [OK] button to close the
message dialog box. Quit this software
immediately.
No holes were found.
No holes were found as a result of a
search.
Click the [OK] button to close the mes-
sage dialog box.
No more redo. (An alarm will be
heard if the shortcut key is used.)
An attempt was made to perform redo
more than the specied times.
Click the [OK] button to close the mes-
sage dialog box.
No more undo. (An alarm will be
heard if the shortcut key is used.)
An attempt was made to perform undo
more than the specied times.
Click the [OK] button to close the mes-
sage dialog box.
No name entered. Please enter
again.
(“Element name”)
The [OK] button was clicked even
though no element name had been
entered.
Click the [OK] button to close the mes-
sage dialog box. Enter an element name,
and click the [OK] button to open the le.
No name entered. Please enter
again.
The [OK], [Load] or [Rename] button
was clicked even though no element
name had been entered.
Enter the desired le name, and click the
button.
No memory card. Please insert a
card.
(VIVID 700, VI-700)
No memory card has been inserted. Click the [OK] button to close the mes-
sage dialog box.
No step angle entered. Please
enter again.
The [Scan] button was clicked without
entering a rotating angle even though
“Other” was selected for [Rotation step].
Click the [OK] button to close the mes-
sage dialog box.
Not Ready for Remote.
Keys on the digitizer were operated
while the monitor image was displayed.
Stop operating the keys and click the [OK]
button to open a message dialog box.
PC Card had reset since last
update.
Power was turned Off then turned On or
the memory card was replaced.
Click the [OK] button to close the mes-
sage dialog box.
The memory card information will be
updated automatically.