Filter
Top Products
162
Chapter
2
Select
Menu
9i
910
900
700
300
Select – Boundary – Elements
Selecting Only the Boundary of Holes of Element(s)
This command is used to select only the points on the boundary of holes among those comprising the selected
element(s).
M
emo
Selected points will be displayed in red, and unselected points will be displayed in blue.
Operating Procedure
1
From the element list, select the desired
element(s).
2
From the [Select] menu, select [Bound-
ary] and then click [Elements].
Among the points comprising the currently se-
lected element(s), the points on the boundary
of holes will be selected and the other points
will be unselected.
Select – Boundary – Points
Selecting Only the Boundary of Holes of Points
This command is used to select only the points on the boundary of holes, among those currently selected.
M
emo
Selected points will be displayed in red, and unselected points will be displayed in blue.
Operating Procedure
1
From the element list, select the desired
element.
2
Select the desired points.
3
From the [Select] menu, select [Bound-
ary] and then click [Points].
Among the selected points, the points on the
boundary of holes will be selected and the
other points will be unselected.
• The selected element(s) will be ready to be dis-
played in all windows. It will be displayed if
it is not displayed in the active window or the
windows for which all the elements are set to be
displayed.
• The selected element will be ready to be displayed
in all windows. It will be displayed if it is not dis-
played in the active window or the windows for
which all the elements are set to be displayed.