Konica Minolta VI-700 Universal Remote User Manual


 
43
Chapter
2
File
Menu
9i
File – Import – Digitizer – Step Scan (When VIVID 9i is Selected)
6
Set optional parameters.
Item Explanation
Scan Parameter
Sets the settings for scanning.
Convert Parameter Sets the settings for three-
dimensionalization.
Stage Parameter Select the rotary stage to be
used.
[Default] button Clicking this restores the
default settings.
Ref.
For details, refer to the parameters (P.49) for [File-
Import-Digitizer-Step Scan-Option] dialog box.
7
Click the [Apply] button to check
whether the rotary stage has been ini-
tialized successfully.
If the rotary stage has been initialized success-
fully, the [Scan] button will be effective.
If initialization is not successful, turn off the
power to the rotary stage power, turn it on again,
and then click the [Apply] button.
Select “Free” for [Rotation Step] in [Stage Param-
eter] eld, and click [Apply]. If the stage has been
recognized properly, a stage slide bar and [Chart
Scan] button will be displayed at the bottom of
the work window when the [File-Import-Digi-
tizer-Step Scan-Option] dialog box is closed.
8
After necessary settings are made,
click the [OK] button.
The settings will be set and the [File-Import-
Digitizer-Step Scan-Option] dialog box will
close.
If the rotary stage has already been used and if there
is no need to change the settings, initialization of the
rotary stage can be performed by clicking on the [Stage
Apply] button in the [File-Import-Digitizer-Step Scan]
dialog box instead of the [File-Import-Digitizer-Step
Scan-Option] dialog box.