Konica Minolta VIVID 300 Universal Remote User Manual


 
111
Chapter
2
File
Menu
700
File – Import – Digitizer – PC Card (When VIVID 700 is Selected)
Importing Data from the Memory Card of VIVID 700
This command is used to remote-control the data stored in the memory card of the VIVID 700 (VI-700).
Note
This command does not operate on step-scan scan data
in the memory card.
Parameters for [File-Import-Digitizer-PC Card] Dialog Box
File name
Displays le names stored in the memory card.
Date
Displays the dates on which the les are stored in the memory card.
Size
Displays the size of each le (in bytes).
Total **
les
Displays the total number of camera data les stored in the memory card.
** MB/ ** MB
Displays the unoccupied capacity and total capacity of the memory card.
M
emo
Before performing the procedure below, make sure that
the digitizer you are going to use is selected by the File
– Select Digitizer command.
Ref.
For details of the File–SelectDigitizer command,
refer to page 144.
Operating Procedure
1
From the [File] menu, select [Import],
[Digitizer] and then [PC Card].
The [File-Import-Digitizer-PC Card] dialog box
will appear.
M
emo
Upper-case le names specied using the camera will
be converted to lower-case le names when the les are
imported to this software.
2
Select the file you want to import.
To display the preview image, check the [Preview
Image] checkbox (so that a check mark appears in
the check box). A color image of the selected le
will be displayed.
M
emo
A clock icon will be displayed during loading.